Validity and the Limits of Correction
Why a perfect measurement might still result in an imperfect room.
What Makes a Measurement Valid?
- Select Measurement Settings: Go to Options > Measurement Settings.
- Check Calibration:** Ensure you have loaded the correct Calibration File (e.g., for a specific mic model or soundcard).
The 8 Rules of Validity
A measurement is valid ONLY for these exact conditions:
- The exact source position.
- The exact microphone position.
- The exact level used (Gain).
- The exact sample rate and bit depth.
- The exact calibration files in use.
- The exact impulse-response window settings.
- The exact EQ or processing state active during measurement.
- The exact time and environment (if noise or people moved).
Movement Rule: Moving the mic even a small amount changes the response, especially at high frequencies. EQ is only strictly valid at the measurement position. Low frequencies are more stable over position; high frequencies change rapidly with distance (inverse square law).
Why EQ Cannot Fix Everything
| Limitation | Explanation |
| Signal vs. Room | EQ changes the signal sent to the speaker, not the room response. |
| Modal Peaks | EQ can tame broad peaks (bass boost), but EQ cannot restore sharp dips caused by cancellation. |
| Phase Correction | Boosting a dip wastes headroom and can damage drivers. It also cannot correct non-minimum phase behavior. |
The Ideal Workflow
The best results come from a combination of:
- Speaker Placement: Acoustically positioning speakers to minimize modal interference.
- Subwoofer Alignment: Aligning phase and distance between sub and main drivers (Time Alignment).
- Acoustic Treatment: Adding absorption/diffusion to break up standing waves (Modal decay).
- EQ as the Final Step: Using REW only to tame what the speakers and room physically allow.